有很多的客戶不了解紙盒包裝制作流程，要求下單就能盡快出貨，其實每一個工藝流程都需要時間，要經過文件制作-制板-工藝-品檢-粘盒來保證質量。今天就為大家介紹一下食品包裝盒制作的流程：

There are many customers who are not familiar with the production process of paper box packaging and request that they place an order to ship as soon as possible. In fact, each process requires time and must go through document production, board making, process, quality inspection, and box gluing to ensure quality. Today, we will introduce the process of making food packaging boxes:

一、制版

1、 Plate making

制版跟環節很重要，因?yàn)檫@個工序直接影響到產品完整性，現在的技術也提高了很多，大多數廠家都是用數字機器制版，一般都需要曬版、沖版、修版、禮品盒講究外觀新奇明快，所以包裝盒制作的版面顏色也是五花八門，通常一種款式的禮盒不僅有4個基本顏色，還有幾個專色，比如：金色，銀色。

The process of plate making is very important because it directly affects the integrity of the product. Nowadays, technology has also improved a lot. Most manufacturers use digital machines to make plates, and generally require plate printing, stamping, plate repair, and gift boxes to pay attention to the appearance of novelty and brightness. Therefore, the color of the packaging box layout is also diverse. Usually, a gift box of a style has not only four basic colors, but also several spot colors, such as gold and silver.

二、選擇紙張

2、 Select Paper

一般包裝盒的禮品盒里面是灰板紙外面裱的是的彩紙或特種紙。彩紙都是用雙銅和啞銅紙。有的是用80G,105G，128G，157G，這些克重的紙張比較常用，禮品盒的外裱彩紙很少用到200G以上的；由于彩紙?zhí)耨言诙Y盒上容易起泡，而且外觀看起來很呆板。當然這也要看產品是什么，根據產品來設計外包裝，再去選擇紙質跟工藝。

The gift box of a general packaging box is coated with colored paper or special paper on the outside with gray board paper. Colored paper is made of double copper and matte copper paper. Some use 80G, 105G, 128G, 157G, which are commonly used for paper weighing in grams. It is rare to use 200G or more of colored paper for wrapping gift boxes; Due to the thickness of the colored paper mounted on the gift box, it is prone to blistering and looks very stiff from the outside. Of course, it also depends on what the product is, designing the outer packaging based on the product, and then choosing paper and craftsmanship.

三、印刷工藝

3、 Printing process

禮品盒大部分都是應用印刷紙，禮品盒是外包裝盒，講究印刷工藝，忌諱顏色的差異，墨點，爛板這些都會影響審美觀。

Most gift boxes are made of printed paper, while gift boxes are outer packaging boxes that emphasize printing techniques and avoid color differences, ink spots, and rotten boards, all of which can affect aesthetics.

四、彩紙的表面處理

4、 Surface treatment of colored paper

對包裝盒的禮品盒的表面彩紙都要做表面處理，常見的就是過光膠、過啞膠、過UV、過光油、過啞油、燙金等等。

The surface color paper of the gift box of the packaging box should be treated with surface treatment, commonly including over gloss glue, over matte glue, over UV, over gloss oil, over matte oil, hot stamping, and so on.

五、啤

5、 Beer

啤是印刷工藝?yán)锖苤匾沫h(huán)節，必須啤很準才能不影響后續的工作，關鍵在于制作刀模。刀模這個環節也是重要的，因?yàn)榈赌Ｒ菍?duì)不準你設計文件，那也是會很大影響到成品，所以一般制作刀模的時候好拿印刷好的成品給刀模師傅制作對位。

Beer is a very important part of the printing process, and it must be accurate in order not to affect subsequent work. The key is to make a knife mold. The process of knife mold is also important, because if you don't design the file correctly, it will greatly affect the finished product. Therefore, when making knife molds, it is generally good to take the printed finished product to the knife mold master for alignment.

六、裱紙工序

6、 Paper mounting process

通常的印刷品都是先裱好再啤成型，唯獨制作禮品盒是先啤后裱彩紙（面紙）：1是怕弄花彩紙。2是禮品盒講究整體美觀，裱上外面彩紙才能看到手工的精巧。

Usually, printed materials are first framed and then molded, but when making gift boxes, they are first framed and then coated with colored paper (face paper): 1. They are afraid of making floral colored paper. 2. The gift box emphasizes overall aesthetics, and the exquisite craftsmanship can only be seen when framed with colored paper on the outside.

如果需要打扣和打孔，都在組裝時完成，如果不用這些包裝盒工序。要做后的表面清潔（將表面的膠水用去污水擦拭干凈）。然后就可以打包裝交貨了。這就是生產禮品包裝盒的工藝流程。更多事項就來我們網站http://www.zlhfp.cn咨詢吧！

If buckle and hole punching are required, they are all completed during assembly, and if these packaging box processes are not used. The surface cleaning should be done afterwards (wipe off the adhesive on the surface with sewage). Then you can pack and deliver. This is the process flow for producing gift packaging boxes. For more information, come to our website http://www.zlhfp.cn Consult!